MAR-TAC-LV1K - Maruson - 1000VA Online UPS 4 Outlets
| The Tacoma is a robust true double-conversion online UPS with pure sine wave output for a reliable, top-of-the-line battery backup solution with power protection for mission-critical equipment that are vulnerable to power fluctuations and outages. DSP-controlled technology provides advanced UPS management and monitoring capabilities while ABM monitors and optimizes battery charging to prolong the lifespan of the UPS and internal batteries. The wide input voltage range improves the reliability of the UPS while the 1% output voltage regulation delivers a more precise output voltage to connected devices. Have peace of mind knowing your mission-critical equipment is protected with uninterrupted performance and enhanced power protection. |
| Typical Applications Mid-size servers ATMs Lab equipment |
Networking devices Surveillance systems VoIP / PBX systems |
Security systems Gaming computers Slot machines |
| Main Features (4) Battery-Backed Outlets with Surge Protection These outlets keep critical electronics online during a temporary blackout and offer protection from power surges and voltage spikes. If a blackout occurs or a power disruption beyond the tolerance range is detected, the UPS will switch over to battery power and supply these outlets with power. True Double-Conversion Online Topology The main supply is fed directly into the UPS and charges batteries within the UPS. The battery power is then converted back to the main power to feed the protected equipment. Zero Transfer Time True online double-conversion topology for zero transfer time from Line Mode to Battery Mode in case of a power disturbance prevents malfunction of mission-critical equipment. Pure Sine Wave Output Best waveform for sensitive electronics. Benefits include: • Smoother waveform • Best for sensitive equipment • Higher quality than a modified sine wave • Maintains voltage at a safe level • Motors run at their intended speed and with less heat • Equipment runs with less noise • IT equipment lasts longer • Low harmonic distortion DSP Controlled Technology DSP (digital signal processor) controlled technology for high reliability, accuracy, and efficiency. Active PFC to Improve Power Factor Active PFC (power factor correction) improves the power factor and power quality of the UPS by reducing harmonic distortion on the electrical system to improve energy efficiency and reduce energy loss. Additional benefits include active wave shaping of input current, low voltage drop, filtering high frequency switching, waveform control through feedback sensing from the power source, and regulation of output voltage based on feedback control. 1% Output Voltage Regulation The UPS regulates the output voltage to be within 1% of the set output voltage. Voltages outside acceptable ranges can cause electronics and electrical components to overheat and may cause premature failure of the devices. The voltage reference of this UPS is set to a fixed 1% output voltage regulation even when parameters such as ambient temperature change. A precise output voltage is important for sensitive electronic equipment such as ones that require calibration for accuracy and also sensitive electronics are more susceptible to damage when receiving power outside its input range. Wide Input Voltage Range Minimizes the need to switch over to battery power and frequency of battery charge and recharge cycles by correcting extreme voltage distortion for higher system reliability. EMI / RFI Filter EMI / RFI filter suppresses electromagnetic noise and radio frequency interference transmitted from AC power. Advanced Battery Management Maximize battery performance and lifespan with an intelligent, multi-stage battery charging system to auto-sense the optimal battery charging performance based on battery levels. |
Overload Protection Protects the UPS from an overload. If the circuit breaker trips, unplug a few electronics before resetting the circuit breaker and turning your unit back on. Set Output Voltage and Frequency (for Battery Mode) The output voltage can be set to 100 / 110 / 115 / 120Vac and the frequency can be set to either 50Hz or 60Hz for better performance with sensitive electronics when the UPS runs on battery power. In Line Mode or ECO Mode, the UPS output voltage and frequency synchronize with the input voltage and frequency. NOTE: Setting the UPS output to 50Hz will derate the UPS capacity by 40%. For this UPS, the capacity will be cut down to 540W maximum output capacity. Cold Start Capable Turn on the UPS even without utility power as long as there is sufficient battery power. Auto-Restart During AC Recovery Once power returns to normal and the battery levels are sufficient, the UPS will automatically restart. Off-Mode Charging The UPS continues charging the internal batteries when powered off as long as the unit is plugged into an AC mains wall socket. Power Management Software Monitor and control the UPS from your computer with the included user-friendly software to automate computer shutdown, monitor battery levels, set UPS parameters, receive alerts of abnormalities, and more. LCD Screen See real-time status information of your UPS power conditions including the voltages, battery level, fault detected, and more. Emergency Power Off (EPO) Tab Instantly shut off the UPS and prevent the UPS from supplying power in the event of an emergency. Mute Audible Alarm Temporarily mute the audible alarm from your UPS by pressing the ON button when audible alerts are ongoing. The mute setting is reset once the UPS returns to a normal state for the next time unusual activity is detected. Optional Accessories (Not Included) • Network Management Card - For remote power monitoring. See model number #NMC for compatibility with this UPS series. • Add-On External Battery Banks - Extend the battery runtime in the event of an extended power outage. See model # TAC-LV1KBB for compatibility with this UPS series. Maximum 3 x TAC-LV1BB may be used. Warranty (US & Canada) 2-year equipment warranty, 2-year battery warranty, and 2-year $25,000 connected equipment warranty with product registration. See Terms and Conditions and Warranty Policy pages for additional information. |
Capacity: 1000VA / 900W
Topology: Online double-conversion
Wave Form: Sine wave (on-battery)
Battery: 3 x 12V / 7Ah SLA
Transfer Time: 0ms (line to battery)
Inlet: 5-15P
Outlets: 4 x 5-15R
Input Voltage: 120Vac, single-phase
Output Voltage: 120Vac, single-phase
Additional Features:
- DSP control & active PFC
- Wide input voltage range: 55 - 150Vac
- 1% output voltage regulation
- EPO & ECO Mode
- RS232 & HID USB communication ports