TCB300 - Platinum Tools Cable Prowler Tester
The Platinum Tools TCB300 Cable Prowler Tester is a powerful feature rich tester for use with any category network, coax, or telephone cable. No other tester does it all like the new Cable Prowler!
Characteristics:
- Cable Measurements: Cable Testing and ID: up to 1000 ft (305 m), Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m), Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft), Supports 8 continuity and ID number remotes (RJ-45), Supports 20 RJ-45 and 20 F-connector ID only remotes
- Power over Ethernet: Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE, Tests for classes and loads cable up to 25.5 watts (at class 4) Identifies Mode A or B (pairs with PoE)
- Active Ethernet: Indicates advertised speeds of 10/100/1000base-t half or full duplex, Can Link to network at 10/100base-t
- Maximum Voltage: Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester.
- RJJack:66Vdcor55Vac
- F-connector:50VdcorVac
- Save Test Results: Stores up to 250 Cable or network tests with user defined names
- Tone Generation: Tone Frequencies: 730 Hz and 1440 Hz
- Languages: English, French, Spanish
- Battery Life: For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery: Operating – 20 hours typical Standby – 1.5 years typical (200uA max standby current). Batteries are included
The Platinum Tools TCB300 Cable Prowler Tester includes:
- Cable Prowler Main Unit
- Coax and Network Remote Set: #1-5, F-Conn coupler includes foam holder
- Network/Tel Testing and ID Remote #1
- RJ12 Cable – Qty 2
- Micro USB Cable
- Handy Hanging Pouch
- Includes: (1) TCB300 Cable Prowler Tester Kit
- High resolution full color graphical display
- Displays wire map in color per TIA-568A/B color codes, in pin or pair order (configurable)
- Protective silicone holster
- Micro USB connector (to export cable reports), RJ45 connector, and Coax connector
- Displays length measurement for each pair in feet or meters using TDR technology
- Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
- Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
- Link light to identify location on a hub/switch/router port
- Tests ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
- Generates selectable tones on selected pins for use with tone tracers
- Supports up to 8 testing & ID remotes for network & telephone cables
- Supports up to 20 network & coax ID - only mapping remotes
- View saved cable tests
- Full color graphical wire-mapping
- Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)
- Multilingual (English, French, Spanish)
- Part#: TCB300