All Products

The Paradox NV5 is the next generation of the ENVY Digital Detection series.It has evolved from its predecessor NV500 - new firmware and improved hardware enables faster and more reliable detection, false alarm immunity and more, packaged in the sleek design you are familiar...

The Paradox DG75+ is a high-end performance true pet immunity motion detector used for Paradox security alarm systems. The DG75+ uses precision analysis, two separate infrared sensors, and a unique pet friendly lens to detect intruders with absolute accuracy. The DG75+ will ignore pets...

The Paradox 460 is vertical view motion detector designed for indoor residential security applications. It has an adjustable lens and has the ability to detect hand-sized objects for card access applications, or a human body for indoor security. The 460 offers adjustable alarm signal duration,...

The Paradox ACM12 4-Wire Access Control Module is designed to be used with the Digiplex EVO System control panels. Each ACM12 allows you to connect a reader, a REX device, a door contact and a locking device to control the access to one door....

The Paradox 307USB Direct Connect Interface allows for direct on-site communication between a computer and a control panel. It can also be used to upgrade your control panel?s firmware. The 307USB includes 3 LED status indicators, and connects from the control panel?s serial port...

The Altronix AL1024ULACMCB 8 Output 24VDC 10 Amp Access Control Power Supply converts a 115VAC 60Hz input into eight (8) independently controlled 24VDC Class 2 Rated power limited PTC protected Fail-Safe and/or Fail-Secure outputs with a total of 10 amp continuous supply current. It...

The ICC ICRW13ICWH 1 3/4" White Raceway Inside Corner Cover 10 Pack is designed to support right side angle turns around internal corners when installing 1" raceway sections. They also help maintain the cable bend radius to protect the integrity of your low voltage...

Wavenet’s WMR Series (8U, 15U & 30U) provides an ideal solution for intermediate distribution frame (IDF) network cabling installations. Designed for efficiency and space-saving applications, these wall-mount racks serve as a cost-effective alternative to traditional floor-standing 2-post racks and full-size cabinets. They offer reliable...

WAVENET 3U 15" Vented Bottom Single-Sided Rack Shelf – Black Powder Coated – This 3U rack-mountable shelf is engineered to support equipment up to 75 lbs. Featuring a vented bottom for optimal airflow and a durable black powder-coated finish, it ensures reliable strength and...

This rack-mount PDU features a high-quality, rugged all-aluminum alloy housing for enhanced durability and long-term performance. It includes a total of 12 outlets—2 front-facing and 10 rear-facing—providing flexible power distribution for a variety of equipment. Designed for standard 19-inch rack installations, it offers an...

Wavenet’s PDH-SS Series cable managers are designed for standard 19-inch racks and cabinets, providing an efficient solution for horizontal cable organization. Available in both 1U and 2U sizes, these single-sided slotted finger ducts offer a cost-effective and practical way to route and manage cables....

48-Port F/UTP (shielded and unshielded) Patch Panels are compatible with all Wavenet modular connectors to maximize versatility with a variety of media applications and enable easy upgrades and expansions. The panel fits all industry-standard 19-inch racks and cabinets. They are integrated with ground wire...

The WAVENET 6EPP48 48-Port Cat6 Patch Panel is a high performance patch panel designed for high speed telecommunications and internet applications. It features a built-in strain relief bar, allowing cables to be wire-tied ( 48 ties included ) to the bar, taking stress off...

WAVENET 1U 14" Solid Vented Bottom Single-Sided Rack Shelf – Black Powder Coated – This 1U rack-mountable shelf combines a solid and vented bottom for both strength and airflow, supporting equipment up to 25 lbs. With a durable black powder-coated finish and single-sided design,...

Wavenet’s VCMC Series single-sided plastic duct vertical cable manager is an ideal solution for efficient cable management on 2-post and 4-post 45U racks. Designed to support organized cable routing, it helps maintain a clean and structured installation while improving accessibility. Its durable construction ensures...

Wavenet's PDH-SS Series cable managers are designed for 19" racks and cabinets. Available in both 1U and 2U sizes, these single-sided slotted finger ducts provide a cost-effective and practical solution for organizing and routing horizontal cables. Each unit features large rear pass-through holes and...

Category 6A CAT6A 2U 48-Port, 110-Type UTP, 10G Patch Panel is component compliant to ANSI/TIA Category 6A connecting hardware requirements. The horizontal 110-Type insulation displacement connectors (IDCs) are designed to provide optimum permanent and channel link performance and help reduce potential Alien Crosstalk (ANXT)...

This 25-pack of 6-port single gang flush mount faceplates is designed to fit standard single gang outlet boxes, providing a clean and organized solution for network and multimedia installations. Each faceplate features universal keystone ports compatible with a wide range of modular snap-in connectors,...

The 12" Wall Angle Support Bracket provides sturdy perpendicular wall support for cable ladder runways, ensuring secure and reliable installations in professional environments. Constructed from high-strength steel, it is built to withstand heavy loads while maintaining structural integrity. Each support includes a wall angle,...

The rack-to-runway plate provides a secure connection between a cable runway and the top of any 3" channel relay rack, ensuring stable and organized cable management. Constructed from high-strength steel, it offers durability and long-lasting performance for demanding networking and electrical installations. This component...

The horizontal E-bend is designed to create a smooth 90-degree sweep in the horizontal plane for cable ladder runway systems. Engineered to comply with minimum cable bend radius requirements, it helps protect cable integrity while ensuring efficient cable routing. Installation is made easy using...

This all-in-one solution is designed to support cable routing from the wall to 2-post or 4-post distribution and cable management racks. It provides a complete and efficient system for structured cabling installations, ensuring stability and proper organization throughout the pathway. The kit includes one...

The ICC ICMPP48CP6 48 Port Cat 6 FEEDTHRU Patch Panel is designed to support the distribution of voice, data, and audio needs in residential and commercial applications. It provides 48 feed-through coupling ports which consist of Cat 6 RJ-45-to-RJ-45 connections on both sides. This...