All Products

The SECO-LARM E-941S-1K2/ZQ is a mounting bracket kit designed for the SECO-LARM 1200-lb series electromagnetic locks. It includes one "Z" bracket and one "L" bracket for mounting on inswing doors. The "Z" bracket consists of two parts and is adjustable for flexible positioning of...

The SECO-LARM E-941DA-1K2Q is a high security electromagnetic lock that is ideal for securing double doors against unauthorized entry. When power is applied to the electromagnetic locks, it creates an extremely strong magnetic field. The electromagnets on the E-941DA-1K2Q are strongly attracted to the...

The 24VAC 40VA Plug-In Transformer is a reliable power solution designed for consistent performance in low-voltage applications. It features a 115VAC input and delivers a steady 24VAC/40VA output, making it ideal for security systems, doorbells, and other electronic devices. UL Listed for safety and...

The Altronix TP1640 Transformer delivers a reliable 16.5VAC output with a total current capacity of 2.4A, making it ideal for powering a variety of low-voltage devices and security applications. Designed for durability and consistent performance, this compact transformer is easy to integrate into existing...

The Altronix AL1012ULXPD8CB is an 8 output 10 Amp access control system power supply/charger. It converts 115VAC, 60Hz input into four (8) 12VDC Class 2 Rated power limited outputs. The AL1012ULXPD8CB provides 8 outputs with 10 amps of continuous supply current. The outputs are...

The Flair Electronics VIP94-2 is a 3/8" STUBBY recessed magnetic contact used to support various door and window alarm contact applications. The VIP94-2 is a white 3/4? gap closed loop magnetic contact that features 18" wire leads to support a professional security installation. The...

The SECO-LARM SL-126-A24Q/B is a standard 6-24VDC blue strobe light designed to support numerous indoor and outdoor security, alarm, or general signaling applications. The SL-126-A24Q/B allows for a simple 2 wire installation and features a long operating lifespan of over 300 continuous hours (2,000,000...

The SECO-LARM SD-7201GC-PEQ is a stainless steel Request-To-Exit plate used for access control and security applications. It gives you the ability to quickly exit an electronic door that is usually attached to an access control system. The SD-7201GC-PEQ fits in a single gang low...

The SECO-LARM SA-026Q is a low-voltage miniature delay timer module designed for various low voltage security and access control applications. The SA-026Q will extend the activation time of a momentary contact switch for 1 - 60 seconds via a field-adjustable rotary pot. It is...

The SECO-LARM E-942FC-600 is a 600 pound weatherproof electromagnetic lock designed for securing sliding and swinging electric doors. This electromagnetic lock is waterproof and vandal resistant, so you can rest assure your lock is 100% protected from the elements. The E-942FC-600 is 12 or...

The Linear ACP00937 AE-100 Commercial One Door Telephone Entry System is designed for use as a primary access control device for apartments, condominiums, and offices with up to 125 residents. The AE-100 system can be used in a lobby or outside. Surface, recessed, and...

The ICC ICRW13ICWH 1 3/4" White Raceway Inside Corner Cover 10 Pack is designed to support right side angle turns around internal corners when installing 1" raceway sections. They also help maintain the cable bend radius to protect the integrity of your low voltage...

The ICC ICRW12ICWH 1 1/4" White Raceway Inside Corner Cover 10 Pack is designed to support right side angle turns around internal corners when installing 1" raceway sections. They also help maintain the cable bend radius to protect the integrity of your low voltage...

The ICC ICRW11EOIV 3/4" Ivory Raceway Flat Elbow 10 Pack is designed for allowing left and right turns when using 3/4" raceway sections. The main raceway sections are designed to fit directly into the flat elbows to provide a clean finish when re-directing raceway...

Wavenet’s WMR Series (8U, 15U & 30U) provides an ideal solution for intermediate distribution frame (IDF) network cabling installations. Designed for efficiency and space-saving applications, these wall-mount racks serve as a cost-effective alternative to traditional floor-standing 2-post racks and full-size cabinets. They offer reliable...

Wavenet’s WMR Series (8U, 15U & 30U) provides an ideal solution for intermediate distribution frame (IDF) network cabling installations. Designed for efficiency and space-saving applications, these wall-mount racks serve as a cost-effective alternative to traditional floor-standing 2-post racks and full-size cabinets. They offer reliable...

These are designed for installations where space is limited and can be used as an alternative to more expensive racks and cabinets. Single-sided hinged feature allows users to have quick access to the back of patch panels and cable managers. Brackets are also integrated...

These are designed for installations where space is limited and can be used as an alternative to more expensive racks and cabinets. Single-sided hinged feature allows users to have quick access to the back of patch panels and cable managers. Brackets are also integrated...

These are designed for installations where space is limited and can be used as an alternative to more expensive racks and cabinets. Single-sided hinged feature allows users to have quick access to the back of patch panels and cable managers. Brackets are also integrated...

These are designed for installations where space is limited and can be used as an alternative to more expensive racks and cabinets. Single-sided hinged feature allows users to have quick access to the back of patch panels and cable managers. Brackets are also integrated...

WAVENET 3U 15" Solid Bottom Single-Sided Rack Shelf – Black Powder Coated – This 3U rack-mountable shelf is designed to support equipment weighing up to 75 lbs. Featuring a solid bottom and a durable black powder-coated finish, it provides reliable strength and stability for...

WAVENET 2U 10" Vented Bottom Single-Sided Rack Shelf – Black Powder Coated – This 2U rack-mountable shelf features a vented bottom for improved airflow and is built to support objects up to 50 lbs. Its durable black powder-coated finish ensures long-lasting strength, while the...

WAVENET 2U 10" Solid Bottom Single-Sided Rack Shelf – Black Powder Coated – This 2U rack-mountable shelf features a solid bottom and a durable black powder-coated finish, providing reliable support for equipment up to 50 lbs. Designed for single-sided mounting in standard 19" racks,...