AMPLV602B - OWI 6.5 Amplified Surface Mount Speaker Pair, Black
The OWI AMPLV602B 6.5” Amplified Surface Mount Speaker Pair provides high performance speakers perfect for schools, hotels, conference rooms, training rooms, and any other surface mount home or business audio application. The AMPLV602B is sold in a combo. You get 1 amplified and 1 non-amplified speaker.
It AMPLV602B 6.5” white surface mount speakers feature: Aluminum Grill, High-Impact Polystyrene Housing, 15V Power Supply, and a fast to install Mounting Bracket. The AMPLV602B speakers have 6.5” woofers and a .79” tweeters used to deliver high quality professional sound!
- Includes: AMPLV602B 6.5” Amplified Surface Mount Speaker
- Sold as combo
- 2- way, 6” woofer, 4?
- One self-amplified (AMPLV602) with 15VDC Level V power supply and mounting bracket
- CE and FCC certified
- Perfect for schools, hotels, conference rooms and training rooms
- Sold as each
- Description: 6.5", 2-Way, Active, Full Range
- Outdoor: No
- Impedance: 4 Ω
- Dispersion: 92°
- Sensitivity (1W / 1M): 83 dB (VR at Max)
- Power: 15 W x 2
- Maximum Power: 30 W
- Nominal Power: 15 W
- Frequency Response: 80 Hz - 20 kHz
- S/N: >80 dB
- Input Con?guration: RCA L/R
- Input Load Impedance: 20 KΩ
- Maximum Current Protected: Yes
- One Wire to Ground Protected: Yes
- Short Circuit Protected: Yes
- THD: <0.2%
- High Frequency Driver: 1.5 kHz - 20 kHz
- Low Frequency Driver: 80 Hz - 6 kHz
- Woofer Size: 6.5"
- Woofer Material: Mica
- Tweeter Size: .79" (20 mm)
- Tweeter Material: PEI
- Enclosure: High Impact Polystyrene (HIPS)
- Grill Material: FE
- Dimensions (LxWxH): 9.5 x 8.46 x 11.3" (242 x 215 x 288 mm)
- Weight (Pounds/Kgs): 12 lbs. (5.5 Kgs)
- Colors: White or Black
- Part#: AMPLV602B
Installing the AMPLV602B Low Voltage Amplified Surface Mount Speakers
1) When mounting speakers, use the mounting bracket as a template for marking and drilling three holes.
2) Assemble mounting screws, spring washers, flat washers and nuts to attach mounting brackets to mounting surface. Note that:- Screws, washers and nuts provided are for mounting the cabinet from both sides of the mounting location. For any other type of mounting, please consult your local hardware store for appropriate mounting screws.
3) Follow installation directions included with your amplifier (or receiver). Strip 1/2" (12mm) of insulation from each of the two conductors of the wire to expose the bare metal and twist each into a single strand. [Connect the speaker wire to the terminals using the (+) as RED and the (-) as the BLACK].
4) Adjust position of the speaker to obtain the desired sound dispersion