ACM12 - Paradox 4-Wire Access Control Module in 8 X 10 X 3 Metal Box
The Paradox ACM12 4-Wire Access Control Module is designed to be used with the Digiplex EVO System control panels. Each ACM12 allows you to connect a reader, a REX device, a door contact and a locking device to control the access to one door. If desired, door contacts can also be assigned to zones in the control panel to link the doors to the alarm system. This will allow you to use the same door for the access control system and the alarm system.
The ACM12 features automatic unlocking schedule. Safe mode options, built-in supervised 1.5A switching power supply, and supports 4-wire and 26-bit Wiegand card readers. It comes pre-installed in a 8 X 10 X 3 metal box.
- Includes: (1) ACM12 4-Wire Access Control Module
- Transformer Sharing: Use one transformer to power multiple modules that have this feature
- Grant access via card and/or panel access code with the R915
- Arm with card and pin with the R915
- Connections for 1 door (card reader, REX, door contact and lock output)
- Connect only 4 wires between the reader and ACM12 module when using a R910 or a R915 reader
- In-field firmware upgradeable via CONV4USB and WinLoad
- Automatic unlocking schedule
- Door Left Open and Door Forced Open options
- Door unlock and extended delay timers
- Unlock door manually with button or PGM event
- Unlock Door On Fire Alarm option
- Safe Mode option (during a communication loss, the access control door connected to the module can grant access to up to 4 specified cards or any valid access card)
- Built-in supervised 1.5A switching power supply
- Push button to activate or deactivate the Auxiliary output
- Supports 4-wire and 26-bit Wiegand card readers
- Comes installed in a 20cm x 25.5cm x 7.6cm (8in x 10in x 3in) metal box
- Part#: ACM12